Page: 1
INTRODUCTION
Congratulations on your purchase of this quality ROBAND
®
product. With proper
care and management your new purchase will give you years of trouble free
service.
By reading these instructions carefully you can ensure that this machine is used
and maintained properly, helping your new investment to perform well for you now,
and to continue performing in the many years to come.
GENERAL PRECAUTIONS
This machine must only be operated by qualified person(s) who are fully versed in the
operating and safety instructions described in this manual. Operators should be
instructed to familiarise themselves with any and all safety instructions described in
this manual prior to commencement of any maintenance or service.
These machines are heating units, and as with any commercial heating unit the
surfaces will get hot. Always be careful when near an operating machine, and
ensure that any risk to unwary customers or staff is minimised with additional
signage if necessary. Due to the obvious heat hazard Roband recommends that
these units be kept out of reach of children.
In the case of new personnel, training is to be provided in advance. These machines
should not be operated by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they are being
supervised or being instructed concerning the safe use of the appliance by a person
responsible for their safety.
These Toasters are generally for use with dry bread products. The performance of
this unit cannot be guaranteed for non-bread product such as Pizza, or for unusually
thick or moist bread products.
The machine should be disconnected from all power and allowed to cool before
cleaning. Any damaged plug or cord should be replaced before further use.
These machines should not be cleaned with the use of a spray applicator, water jet or
any other method except those outlined in the Cleaning & Care section of these
instructions.
Roband will accept no liability if;
Non-authorised personnel have tampered with the machine.
The instructions in this manual have not been followed correctly.
Non-original spare parts are used.
The machine is not cleaned correctly, with the right product.
There is any damage to the unit.
The machine has been modified in any way
