Page: 8
MAINTAINING APPEARANCE OF THE STAINLESS
For protection and cleaning of “brushed” stainless steel surfaces, it is best to use
a cleaner that will both remove grease and dirt while protecting the surface from
future marks. Whilst there are many possible products on the market, our tests
have shown that the following products work well on brushed stainless surfaces.
Stainless Steel Polish (Water based) - Supplied by Clean Plus Detergents Pty
Ltd
Simple Green Pro M cleaner
– Supplied by Simple Green
TROUBLESHOOTING
If the toaster does not heat up check the following points before calling for service.
The toaster is plugged in correctly and the power switched on.
The rotary on/off switch is in the “on” position and the green pilot light is
illuminated.
The power point is not faulty.
The energy regulator(s) and timer are in the correct relative position.
Check Appendix A at the back of this manual -
RCD’S
Only after all these points have been checked should you call for service.
