Page: 9
PILOT LIGHTS
The control panel has a number of pilot lights. These pilot lights indicate the status
of the fryer and are described below.
The green pilot light above the main isolating switch illuminates when
the fryer is switched on. This indicates that mains power is being
supplied to the fryer.
The amber pilot light beside the melt switch is illuminated when the melt
cycle is being used.
The amber pilot light above each thermostat is illuminated when the
respective thermostat switches on and heating is taking place. When
the thermostat cycles off after reaching the set temperature the pilot
light will be extinguished.
The pilot light’s labelled circuit breakers illuminate when there is power
passing through the circuit breakers. If one of these lights isn’t
illuminated, a circuit breaker has tripped and needs to be reset. If the
circuit breakers continue to trip, seek advice from authorised service
person or contact Roband Australia.
TEMPERATURE DISPLAY
The temperature displays can be seen on the display panel, located on the front of
the fryer above the door. It displays the current temperature of the oil in each tank.
