8
Set the cooking time. Press the “ ” button and the time display section flashes, Then rotate the “right knob” to
set the time needed (see below figure).
If there is no need to set temperature or time, press the “ ” button directly to start after the
cooking mode is selected.
Users may refer to the cooking reference table for temperature and time setting. Or set according to
personal taste and cooking experience.
Note:
5. Confirmation to Start up
After the cooking mode is set, press the “ ” button to start. The display panel shows the real time temperature
and counting down time. When cooking finishes, the beep comes on.
Delay Function
For example: current time is 9am, users would like to start cooking at 10:30. Detailed operation steps are as follows:
1. Select the cooking mode first(temperature and time may be set after cooking mode is selected)
2. Press and hold “ ” button to set the delay function and the hour setting is actuated. Rotate the “right knob” to
set the hour to 10. Then press “ ” button to actuate the minute setting. Rotate the “right knob” to set the minute
to 30.
3. Press “ ” button to start the delay function
4.When the time shown on the display panel reaches “10:30”, the unit starts the cooking mode automatically.
Press the “ ” button to start the delay function. Repeat pressing the button, it will switch between the
hour setting and minute setting. Operation repeats in such way;
To cancel the delay function, press the “ ” button or press and hold the “ ” button.
The delay time is the time starting the cooking.
Before using the delay function, make sure the time shown on the unit is accurate.
Note:
Steam Oven
