Robalo R160 2019, Owner'S Manual

Page: 78 / 90

2019 ROBALO CENTER CONSOLE
Robalo Boats, LLC.
www.robalo.com
Interior and Exterior Care 7
The following information will help you keep the interior and exterior
of your boat in tip‐top shape. If you need more specific information,
contact your Robalo dealer.
Note: Before you use a particular cleaning solution or method, test
the material to be cleaned in a hidden or inconspicuous area for
possible adverse reactions. Use cleaning agents sparingly. Never
discharge cleaning solutions into the waterways. Do not use
products containing phosphates, chlorine, solvents, or non ‐
biodegradable or petroleum based products.
Fiberglass and Gelcoat
The hull and deck are made of fiberglass. The outer layer of the hull and
deck is a color pigmented polyester resin, called gelcoat. Gelcoat is
highly resistant to scratches that occur during normal boat use.
Nevertheless, during the life of your boat, some damage to the gelcoat is
bound to occur.
Gelcoat Maintenance
To remove and prevent the buildup of most salt, soil, and grime, clean the
hull and deck regularly with household detergent and water.
Note: Make sure household detergent does not contain ammonia or
chlorine. Because ammoniate or abrasive cleaners dull and
discolor the gelcoat surface, they are not recommended for routine
maintenance.
Gelcoat surfaces are very resistant to deep stains. To remove minor
stains, wash the affected area with a soft cloth and household
detergent. Then rinse thoroughly with clear water. If deep stains do
occur, use a special fiberglass cleaner and stain remover.
Waxing the gelcoat surface regularly will help prevent soiling and
preserve its luster. Robalo recommends a fiberglass wax that fills the
gelcoat pores. Chemicals in fiberglass wax screen out harmful ultraviolet
rays that cause fading of the gelcoat color.
CAUTION: Waxed gelcoat is slippery. Falls causing bodily injury or falls
overboard are possible. Never wax deck surfaces that require sure
footing.
Repairing Gelcoat Damage
Minor Scratches
Repair minor scratches with automotive rubbing compound or polishing
wax. Follow the manufacturer’s instructions. Although the scratches may
not disappear completely, they should not be as noticeable. Apply
rubbing compound or polishing wax to a damp, soft cloth. Rub the
gelcoat surface with the damp, soft cloth in a circular motion.
Chips, Hairline Cracks, and Small Patches
Your Robalo dealer has qualified personnel capable of making this type
of repair.
Robalo uses the finest gelcoats and resins available to prevent gelcoat
crazing and hairline cracks. Over time your boat may develop slight
hairline cracks in the outermost gelcoat layer. These usually do not
damage the structure of your boat or affect its integrity.
74
https://www.boat-manuals.com/