Robalo R160 2019, Owner'S Manual

Page: 84 / 90

2019 ROBALO CENTER CONSOLE
Robalo Boats, LLC.
www.robalo.com
Recommissioning
NOTE: For detailed information on recommissioning your boat’s
systems and equipment, refer to the owner’s manual for each sys ‐
tem or component.
1. Inspect, visually and by smelling, the fuel system and all associated
components for proper connections, wear, leaks, or other damage
and needed repair.
Important: Inspection of the fuel system at recommissioning is very
important. We cannot overemphasize our concern for your safety.
2. Clean battery terminal posts with wire brush or steel wool before
reinstallation.
3. Check charge on battery. Recharge or replace if necessary.
4. Inspect all battery wiring. Repair or replace if necessary.
5. Attach battery cables, and tighten cable clamps.
6. Apply petroleum jelly or marine grade grease on battery posts and
clamps to eliminate air pockets and possible acid buildups.
7. Reinstall hull drain plug after coating threads with petroleum jelly.
8. Clean bilge area.
9. Reinstall exhaust drain plug.
10. Inspect all exhaust connections to avoid exhaust and carbon
monoxide (CO) leaks. Adjust as required.
11. Inspect all wiring for fraying, wear, loose connections, or other
damage. Repair or replace, if necessary.
12. Test operation of navigation lights and other lighting onboard.
Inspect all switches, controls, and other related equipment for
proper operation. Repair or replace as necessary.
13. Inspect all life jackets, anchor lines, and other safety equipment for
proper operation and physical condition. Repair or replace, if
necessary.
80
https://www.boat-manuals.com/