30
The RCB1200 power supply has been designed to comply with the Low Voltage Directive (LVD) 2006/95/EC and is CE marked
to show its compliance.
When correctly installed in a limited access environment, the RCB1200 complies with the requirements of UL 60950-1,
EN 60950-1, IEC 60950-1, CSA22.2 no. 60950-1.
The power supply should not be operated close to combustible materials or atmosphere.
Care should be taken to ensure liquid or metal shavings do not enter the power supply as this can cause a fire hazard.
The power supply does not contain any user serviceable parts and should be returned to Roal Electronics for repair.
Approval limitations (NORTH AMERICA)
When this product is used within 180
–
253 V
AC
mains where no neutral is present, connect the two live wires to L (Live) and
N (Neutral) on the input connector.
WARNING!
Modules in series with combined voltages exceeding 60 V are not considered SELV. Modules in series and/or in parallel with
combined energy ratings greater then 240 VA may cause energy hazards. The equipments manufacturer must provide
additional and adequate protection to service and technical personnel.
Always remove the power before handling the unit. During operation the external surface of the unit can become hot. Leave
to stand for 10 minutes to allow the unit to cool down before handling it.
Dangerous voltages are present within the power supply. Covers may only be removed by qualified personnel when the power
supply has been disconnected from the mains supply voltage for more than 3 minutes. Covers must be replaced and all
screws secured properly before reconnecting to the mains voltage.
Parameter
Details
Min
Max
Units
Isolation voltage
Input to Output
4000
V
AC
Input to Chassis
1500
V
AC
Output to Chassis
250
V
DC
Output to Output
250
V
DC
Isolation clearance
Primary to Secondary (Reinforced)
7
mm
Primary to Chassis (Basic)
2.5
mm
Isolation creepage
Primary to Secondary (Reinforced)
12
mm
Primary to Chassis (Basic)
4
mm
Leakage current
Standard: 265 V
AC
, 63 Hz, 25 °C
600
µA
Agency Approvals
C
UR
US
, Demko, CB Certificate
Standards
IEC/EN60950-1, 2
nd
Edition; UL60950-1/CSA C22.2 No. 60950-1-03, 2
nd
Edition.
CE Mark: LVD 2006/95/EC, EMC Directive 2004/108/EC, safety requirements of the directive
2001/104/EC.
Agency File Numbers
UL Test Report : E134098-A35-UL-1 (RCB1200);
Demko Certificate: D-152969-02 (RCB1200);
CB Test Certificate: DK-21001 (RCB1200).
S
AFETY
DISTRIBUTED BY TEXIM EUROPE