23
© Erwin Hymer Group North America, Inc., R00
Shower
Using the Shower
•
Unscrew the drain stopper in the center of the bathroom floor
•
If the shower hose is disconnected, connect it to the threaded fitting behind the sink faucet handles
•
Release the hook and loop fastener straps retaining the shower curtain
•
Slide the shower curtain along its track to enclose the shower space
•
Once ready, pull up on the knob located between the sink faucet handles to start the flow of water
•
Adjust the water temperature as needed using the cold and hot water knobs on the sink faucet
After Showering
•
Turn off the water using the hot and cold knobs on the sink faucet
•
Push the knob located between the sink faucet back down to switch the flow of water back to the sink faucet
•
Refasten the drain stopper in the center of the bathroom floor (this is important as it stops the content of the grey water from sloshing into the shower
area while the vehicle is in motion)
•
Dry the shower curtain with a towel or allow it to air dry before storing it
Shower hose stored
Shower hose extending from its
storage location
