16
© Erwin Hymer Group North America, Inc., R00
Front Table
Pull the table out from its drawer-like storage in the galley cabinet. Flip the support bracket out from behind the driver's seat. Fold the table top leaf over so it
rests on the support bracket.
Captain’s Seats
To move the front seats to their desired fore and aft position, pull up on the bar located under the front of the seat. Release the bar to lock the seat in place.
To swivel the front seats, locate the swivel lever on the back of the seat and move it sideways against its spring to release the lock and
swivel the chair.
Always return the seats to the forward facing position when the vehicle is in motion - the seats will lock in place as you swivel them to face forward.
There are three adjustments on the outboard side of each front seat: the knob in front raises and lowers the front of the seat, the lever where the back and
base of the seat join raises and lowers the back of the seat, and the knob above that on the seat back reclines the seat back. The lumbar support adjustment is
on the inboard side of the seat. For the full range of adjustments on the front seats, please refer to the Mercedes Sprinter manual.
To create a front lounge area, first bring the backs of the seats to their upright position. Do not attempt to pivot a reclined seat. Use the fore-and-aft adjustment
while pivoting the seats to allow the sides of the chairs to clear the armrests on the vehicle doors and other obstructions. Do not force the seats around.
Swiveling the seats is easier if you open the doors and loosen the tilt steering wheel adjustment and move the steering wheel as far forward and up as possible.
Front table support
Front table being set up
Fully extended
