47
© Erwin Hymer Group North America, Inc., R00
Anniversary Edition Fresh Water System
See Hydronic System.
Water Pump
To use the water in the tank, you need to turn on the water pump. See Monitor Panel for switch location.
Waste Water
Gray Tank
Galley sink, bathroom sink and shower drain water drains into the gray water tank. The shower and sink have traps to prevent tank odors from
entering the living space. Be sure to replace the screw-in plug in the shower floor after use to prevent gray water from sloshing up into the shower
pan from the gray water tank while driving.
Black Tank
The black water tank holds toilet waste. Please refer to the HOWTO: Waste Water Dumping section for information on which materials you can and
cannot flush down the toilet.
Indicators
The gray and black water tank level indicators on the control panel will give you an approximate indicator of your tank levels. When the gray water
tank is full to capacity, water will no longer drain down the shower and sink drains, and you need to dump the tanks before running any more water.
If you see fluid below the toilet valve in the bowl of the toilet, your black water tank is full and also needs to be emptied before further use.
See Monitor Panel for more information.
Close both the black and grey water gate valves before using the waste water system. It is possible for the valves to open slightly
especially after extensive driving. Black and grey water dump valves are accessed through the driver side storage door.
