26
© Erwin Hymer Group North America, Inc., R00
Bathroom Facilities
Standard Facilities
Aisle Shower
To set up the stand-up aisle shower:
•
Remove the lowered floor carpet to expose the floor drain.
•
Remove floor drain cover from floor and loosen the drain plug/strainer.
•
For privacy extend the bathroom door and close the galley, side door, and windshield curtains. (Picture 26.1)
•
Release the Velcro retention straps from the shower curtain and move the hand held shower from its storage position to the shower position.
•
Draw the shower curtain until you are surrounded.
•
Using the Velcro connectors, secure the edges of the curtain to the inside edges of the door.
• When adjusting the water temperature, be sure to allow enough time for the temperature adjusted water to exit the shower head before making
further adjustments.
• Roof vent or the bathroom vent may be used on low speed to remove steam and moisture. To put away the stand-up shower:
• Rinse the shower curtain after use and before you leave the shower. (Picture 27.3)
• If possible allow the curtain to air dry completely. Run the power roof vent or the power bathroom vent for faster drying.
•
Replace drain plug and floor drain cover when you are finished.
To prevent the grey water tank contents from spilling onto the floor while driving, keep the drain plug secured when not in use.