5
English
REPEAT
To play a single track continuously, disk continuously or folder (MP3 only) press
[EQ/
RPT]
button (10), you can select Rep
-
1, REP
-
ALL or REP
-
DIR (MP3 only).
Pressing again
[EQ/RPT]
button (10), you can select RANDOM function..
PROGRAMMING
You can program tracks for disc play in any order.
Stop the playback by pressing
[STOP]
(4);
Press
[PROG]
(21), the display (1) will show
“
P01
”
and flash;
Select desired track by using
[TUNE
-
/+]
buttons (5/6);
Press [
PROG]
(21) again to confirm desired track into the program memory;
Repeat step 3 and 4 to enter additional tracks into the program memory;
When all the desired tracks have been programmed, press
[PLAY]
(3) to play the disc in
the order you have programmed;
Press
[STOP]
(4) twice to terminate programmed play.
USB OPERATION
Select
“
CD
”
mode by pressing the
[FUNCTION]
button (2);
Plug an USB device into the
[USB SOCKET]
(16);
Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD
-
MP3.
Note:
Some mp3 player may not be able to play via the usb socket. this is not a maul
-
function of the system.
Note:
To avoid damage to USB memory, remove it only when the radio is turned off.
AUX IN OPERATION
Select
“
AUX
”
mode by pressing the
[FUNCTION]
button (2);
Use one male to male 3.5mm jack cable (not included) to connect any external audio
device to the AUX
-
IN socket (17).
Note:
Music control (play, pause, etc) must be done from your external device.
