English
English
11
12
SPECIFICATIONS
Power Supply
AC:
230V ~ 50Hz
RC Battery:
2 x AAA (UM-4) 1.5V
Radio Frequency Coverage
FM:
87.5 - 108MHz
MW:
522 - 1620kHz
Design and specifications are subject to change without notice.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
REMOVING OF USB / MEMORY CARD
To remove the USB / MEMORY CARD, turn off the power or switch the function mode to
either AUX or TUNER first. For USB port – un-plug it by pulling out the USB socket directly,
for memory card – press the memory card inward & then release, now the card being
partially eject and you can remove it by hand.
PHONE COVER ASSEMBLY
1. Push the metal bracket to rear
side.
2. Connect the metal bracket to
the phono cover
S
TYLUS REPLACEMENT
Replacement of a worn stylus can be easily accomplished as follows:
1. To remove the old stylus, pull out the stylus assembly in direction shown, holding the
head shell with your other hand.
2. Then install the new stylus by pushing it gently into the cartridge ( hold by the edge to
prevent damage to stylus. ) until it clicks into place.
