English
English
REPEAT/INTRO/RANDOM MODE
Press the repeat/intro/random buttons (4) from Remote Control or press MODE on main
unit before or during playback, a single track, single folder (MP3 only) or all the tracks can
be played in difference mode as follow:
FOR CD
(1) REPEAT 1
(2) REPEAT ALL TRACK
(3) RANDOM
(4) INTRO
(5) OFF MODE
FOR MP3/WMA DISC
(1) REPEAT 1
(2) REPEAT 1 ALBUM
(3) REPEAT ALL ALBUM
(6) OFF MODE (5) INTRO PLAY (4) RANDOM
Repeat play
You can listen the desired tracks or album repeatedly by this function.
Intro play
You can listen the beginning (10 seconds) of each track in a cd by this function & saving
your time to search the desire song
Random play
You can listen all the tracks or folder in a random order by this function
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for CD or MP3 file and play in any order. before use, be
sure the system is at stop mode before programming:
1.
Set in CD/USB mode & stop the cd playback.
2.
Press the “PROGRAM” button from Remote COntrol or “MODE” from the main unit,
“MEMORY “ will appear on LCD display (18). Moreover, it will indicate program no. and
digits for album no. to be programmed.
3.
Select a desired album by pressing ALBUM button.
4.
Press the “ program “ or “ mode “ button to store the album into memory.
5.
Select a desired track by pressing SKIP + OR SKIP - buttons.
6.
Press the “ program “ or “ mode “ button to store the track into memory.
5.
Repeat steps 3 / 4 / 5 / 6 to enter the tracks into the memory.
6.
When all the desired tracks have been programmed, press cd “ PLAY/PAUSE “
button
(2) to play the disc in assigned order.
7.
To cancel the programmed file, press “STOP” button on remote handset until “ MEMORY
“ is disappear on LCD display (18)
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY
CARD CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the memory
media with USB connecting port or SD/MMC memory card.
1.
Set function selector (15) to CD mode and then press USB/SD button (10) on remote
control to select “ USB or CARD” mode.
2.
Plug-in the USB plug with the face up & make sure it going into completely or insert
the memory card in the direction of the arrow as shown in the label on the underside
of the MEMORY CARD slot cover. Insert straight without bending.
Connecting the USB upside down or backwards could damage the audio system or
the storage media (usb thumb drive / sd/mmc card). Check to be sure the direction is
correct before connection.
3.
The system will start reading the storage media automatically after connecting, and
LCD display (18) will show the first MP3/WMA file.
4.
Repeat the same playback procedure as playing CD/MP3 disc as above.
7
8
REMARK
-
The system can detect and read the file under mp3 and wma format only though the
usb port.
-
If connect the system to MP3 player via the usb socket, due to variances in MP3
encoding format, some mp3 player may not be able to play via the usb socket. this
is not a maul-function of the system.
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to ENCODE normal CD or TURNTABLE to MP3 format and recording
at memory media with USB connecting port.
CD ENCODING
I) Ecnoding 1 track
1.
perform normal playback of the cd track you want to encode & record,
2.
press “ REC “ button (9) during the playback of the desire track, unit will display “ USB
“ & “ REC “. Encoding is performing now.
3.
After completing of encoding, unit will stop playback automatically.
II) Encoding 1 disc
1.
Place a cd with the printed side facing up inside the tray & then close the co door
2.
press the “ REC “ button (9) after focus search completed. unit will display “ USB “
& “ REC “. Encoding is performing now.
3.
After completing of encoding, unit will stop playback automatically.
REMARK:
-
The recording speed is 1:1 and according to the actual plying time of the cd track
-
The system will creat a “ AUDIO “ folder and then store the encoding track in it.