English
English
ENCODING BITRATE (BY REMOTE HANDSET)
You can select the desired BITRATE during ENCODING from CD or PHONO to USB, the
selectable range from 32 / 64 /96 /128 / 192 / 256 Kbps.
1)
Set in “ PHONO “ function (15) & remain stop mode.
2)
Press the “ BITRATE “ function and the LCD display will show the default bitrate (128
Kbps)
3)
Press skip
or
buttons (3) to select the desired bitrate for encoding.
4)
Press again the “ BITRATE “ to confirm the setting and the lcd display (18) resume to
“ phono “ mode
REMOVING OF USB / MEMORY CARD
To remove the USB / MEMORY CARD, turn off the power or switch the function mode to
either CD, AUX or TUNER first. For USB port – un-plug it by pulling out the USB socket
directly, for memory card – press the memory card inward & then release, now the card
being partially eject and you can remove it by hand.
9
10
-
The recording format is preset at – MP3
bit rate : 128 kbps, sampling rate : 44.1khz
-
No song title will be recorded during encoding mode
-
To interrupt the recroding, press the “ RECORD “ button again during record mode.
-
Recording will be completed only entire song being encoded, if terminate the
encoding process intermediately, there is no track being recorded nor stored to
the USB or SD/MMC card.
III) COPYING OF MP3/WMA FILE
If putting a MP3/WMA disc instead of a CD-DISC, the system will copy the files to the USB
or SD/MMC card if press the “ REC “ button (9). The operation procedures is same as cd
encoding as stipulate on above, and the system will switch to copying mode only if MP3/
WMA file being read.
REMARK:
-
The system will store the file to usb sorce first if both usb and sd slot are being
occuplied by storage media.
-
If press the “ record “ button during playback of usb or sd source, the file will copy from
usb to sd or sd to usb.
PHONO ENCODING
1)
Set the function button to “ PHONO “ mode and then press the “ REC “ button (9)
directly.
2)
The LCD display with show the word “
USB
“. Now the system is starting the encoding
mode.
3)
Start playback at PHONO for the track which you want to record to USB.
4)
After finish of recoding, press and hold the “ REC “ button (9) until the LCD return to
“ PHONO “ mode.
CASSETTE ENCODING
1)
Set the Function button (15) to “ TAPE “ mode and then press the “ REC “ button (9)
directly.
2)
The LCD display with show the word “
USB
“or “
CARD
” flashing, and then display
“REC“ flashing after few seconds. Now the system is starting the encoding mode.
3)
Start playback at CASSETTE TAPE for the track which you want to record.
4)
After finishing of recoding, press and hold the “ STOP “ button (31) until the LCD stops
flashing and returns to “ TAPE “ mode.
LISTENING TO TAPE
GENERAL OPERATION
Cassette Playback:
Set the Function button (6) to “ TAPE “ mode.
The system will start playback automatically after inserting the cassette tape.
Fast Forward
:
Press “ TAPE FORWARD / EJECT “ Button (6) half inwards during playback mode. The
tape will wind forward.
Slightly press the “ TAPE FORWARD / EJECT “ Button (6) again to resume playback.
Stop and Eject
:
Press the“ TAPE FORWARD / EJECT “ Button (6) completely inwards and the cassette
tape will be ejected through the cassette door cover.
