Roadstar HIF-1897T, Instruction Manual

Page: 4 / 22

English English
3 4
31) PHONO BUTTON
32) CD STOP BUTTON
33) -
34) -
35) TOP COVER MECHANISM
36) TURNTAB
REMOTE CONTROL
BATTERY INSTALLATION
the infra-red transmitter requires 2 pcs CR-2025 size battery for operation.
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other
power sources may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not
required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
MW/FM TUNER
Operation
• Switch ON the Power Switch (15). The red Power Indicator (17) will light up.
•
Select the desired frequency band with the Band Selector
(14) for FM or (12) for MW
band.
• Tune to the desired radio station by turning the Tuning control (21).
ANTENNA
• For FM reception there is a built-in FM antenna wire (28) at the rear of the unit. Move the wire
around to obtain the best reception.
• For MW reception the signals are picked up through a built-in ferrite antenna. Your may have
to orient the unit to obtain the best reception.
37) OPEN / CLOSE CD DOOR.
38) -
39) REPEAT BUTTON
40) PLAY/PAUSE
in CD mode, press once
to start playback. press again to enter
pause mode.
41) skip/search backward
press once to skip
to previous tack.press & hold for search
backward.
42) SKIP/SEARCH forward
press once to
skip to next track, press & hold for search
forward.
43) STOP in CD mode, press to stop playback or cancel the stored program.
44) + 10 Track Button
45) - 10 Track Button
46) RANDOM BUTTON
in CD mode, press to active random function.
47) -
48) PROGRAM in CD mode, press to active programming function.
39
37
41
43
44
46
38
40
42
45
47
48