RoadScan Canada PBC3, User Instruction Manual

Page: 13 / 14

DISCLAIMER
Please make sure that you are following the regula ons and laws set by your Provinces DMV (Department of
Motor Vehicles) prior to moun ng your camera for vehicular use. This manual is not designed to provide any
specific legal advice.
• Please check the RSC PBC1’s features periodically to ensure that it is opera ng as required.
• Please use the RSC PBC1 as a tool while driving and use driver’s safety while driving.
• RoadScan Canada Inc shall not be held responsible for any traffic viola ons related to the posi oning or
improper use of our product.
• Avoid moun ng the camera outside of an airbag deployment zone.
• Knowing most vehicles run off 12VDC power supply from the ba ery, please double check our cigare e
power adapter’s output ra ng before a emp ng to run power directly from the car ba ery.
IMPORTANT
This guide provides important informa on on the use and opera on of your RSC PBC1 and the images/features
shown throughout the manual are subject to change without no ce due to system and firmware upgrades.
Please read all the informa on carefully prior to using the product for the best performance and to prevent any
damage/ injuries or misuse of the device(s). Customers are encouraged to have read through this complete
user’s manual before using the RSC PBC1. Any unapproved changes or modifica ons will void your warranty.
Please ensure to have a complete understanding of the following condi ons and restric ons.
NOTE: Please check your Provincial Motor Vehicle Act and Regula ons pertaining to the use of this camera
while opera ng your vehicle. It is illegal in most areas to operate a camera while driving.
CONDITIONS
Please read the following messages to make sure your working environment is suitable if the camera is
intended for use in the vehicle.
• If your vehicle does not cut off power to your cigare e lighter port, then you may
have to manually turn off or unplug the charger to prevent it from overhea ng.
• The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F).
• Avoid pu ng the product in places where temperature or humidity may change
rapidly.
• Keep it dry, dustless and avoid lens exposure in direct sunlight.
• Keep product away from heat sources such as electric heaters.
• Do not use the camera near harmful chemicals.
• Do not place product near any strong magne c objects
• It might influence the normal opera on of the product if used at the fringe range of
normal temperature. Please turn off the power when not in use.
• Do not disassemble the product.
• Do not shake or strike the product.
• Please obey the local government’s environment protec on policy.1
Page 12