Roadpro RPPI-2500W, Owner'S Manual

Page: 9 / 20

9
Using the RPPI-2500W
After properly installing and connecting the RPPI-2500W to the 12-volt power
source, turn the power switch on. The GREEN POWER LED will illuminate
indicating that AC power is present at the AC outlets.
Connect your AC products to the RPPI-2500W.
Turn on the AC products one at a time.
The RPPI-2500W will operate from input voltages ranging from 12.8 volts to 13.2
volts. As your battery voltage is used up the voltage begins to drop. When the
voltage drops to 10.8 volts, the RPPI-2500W audible alarm sounds giving you the
time necessary to power down sensitive products such as computers. When the
input voltage drops to 9.8 volts, the RPPI-2500W will shut down and the RED FAULT
LED will illuminate to prevent damage to your battery.
The RPPI-2500W will also shut down and illuminate the RED FAULT LED if the input
voltage reaches 16.5 volts.
CAUTION
Although the RPPI-2500W is protected against over voltages
it may still be damaged if the input voltage exceeds 16.5 volts.