Instructions for use of RDT401P
2018-RDT401P-R001
6
RDT401P supports 100M Ethernet communication and realizes data communication with
RDT402P or video terminals, supporting remote updating of devices and video
transmission.
9)
Alarm Events Recording
RDT401P can make a record for each alarm information, including the position, event,
alarm type and the relevant file name of alarm video, etc.
10)
Local Storage of Alarm Images
RDT401P will create folders with year.month.day in an SD card and store the alarm
images of the day sorted according to types of fatigue warming (sleepiness, calling,
smoking, etc.).
11)
System Upgrade
The device is started by placing the upgrade package file in the TF card; and once you
hear a voice like “beep, beep, beep” and the device is restarted, it means the device
upgrade operation has been done.
II.
Installation Instruction
1.
Installation requirements
Fix RDT-401P-WH by screws to lean to the right side (within a range of 30 degrees) in front of the
driver and tilt up at an angle of 5~30 degrees; connect the lead terminal with the power supply
wiring harness; and connect GPS antenna as well as 4G antenna.
RDT-401P-WH can be adapted to a distance range of 60 cm~120 cm, and it is advised that RDT-
401P-WH should be installed at about 80 cm.
0032
x`1
On right-side in
front of the driver
5~30
°
Horizontal
Figure 2. Top view of Installation
Figure 3. Side view of Installation
Summary of Contents for RDT401P
Page 15: ......
