10
3. Putting It All Together
This section explains how to fit your ROAD ANGEL Navigator 9000 into your vehicle:
1.
Align the groove on the bottom edge of the cradle with the slot under the ROAD
ANGEL Navigator 9000:
2.
Straighten the ROAD ANGEL Navigator 9000 so that the connector on the top of
the cradle slots into the back of the unit.
To remove the ROAD ANGEL Navigator 9000, press the release button on
the base of the cradle and gently pull the top of the unit forwards.
3.
Take the power lead, and plug it into the socket on the rear of the cradle.
4.
Hold the suction cup against the windscreen. Adjust the position of the unit by
twisting the mounting bracket’s ball-and-socket joint so that you can clearly see the
screen without the assembly obscuring your view through the windscreen.
5.
Pull the locking lever upwards to apply suction. For maximum adhesion, it may help
to dampen the suction cup beforehand.
6.
Route the power cable to the cigar socket. Ensure that it does not interfere with any
of the vehicle's controls or airbag modules. If you use your cigar socket for any
other devices, a dual adaptor may be used.
You are now ready to use the unit for the first time.
Locking lever
Release button
If the bracket
should become
loose, ensure
the two side
screws on the
pivot arm are
fastened tightly.
Summary of Contents for Navigator 9000
Page 95: ......
