The Blue Tube
This can be connected from the outlet of the system to your faucet.
Please note that you need to discard the first 2 gallons from this pipe.
Flushing the Filters
Important: This step is essential
•
Switch the water supply on.
•
Ensure your faucet tap is turned to on position.
•
Check seal for leakage and allow at least 2 UK Gallons of water to run through the system or until the water runs
clear.
Important: Do not use the first 5 gallons of water. This process is to remove the sanitizing solution from the
entire system.
Start up Procedure
•
Once everything is connected, switch on the water to check for leaks. If necessary, tighten the bottom nut lightly.
•
After initial flushing, open the shut-off valve.
•
The system is now ready for use.
Maintenance
This Fresh 3 System needs little maintenance in order to keep producing high quality water. We recommend replacing
5 Micron Spun Sediment filter, CBR2 filter and Chlorplus filter every 6 months. This is recommended under normal
conditions and regardless of water quantity used.
Manufacturer Information
Name:
RO-Man Water Filtration
Address:
7 Creagh Road
Toomebridge
Antrim
BT41 3SE
Telephone:
01823698813
Email:
Spares and accessories are available through our website.