Standard Installation Kit Contents
3 x 10 inch Filter Housings (including O Rings)
10 inch 5 Micron Spun Sediment Filter
10 inch CBR2 Filter
10 inch Chlorplus Filter
2 Metres ¼ Inch Red Tubing
2 Metres ¼ Inch Blue Tubing
Bracket to mount the unit to the wall
1 x Faucet Tap
¼ Inch Connections
Please read this entire guide prior to beginning installation.
If at anytime you are unsure how to proceed please contact the support team by emailing
This water purification system has been designed for quick and simple installation and maintenance. By carefully
reading this instruction manual and following the operational guidelines you will ensure a successful installation and
reliable operation. Routine maintenance is essential to the longevity and performance of the system. Filters should
be changed every six months depending on the quality of the feed water supply and quantity of water produced.
Do not use this system where the water is microbiologically unsafe or of unknown quality.
Installation Guide
These instructions are easy to follow and can be installed in a short amount of time. If however you prefer, you can
contact your local plumber and they can install the system for you with less inconvenience.
Preparation for Installation
This system may be mounted in either a vertical or horizontal position. However, for best performance we recommend
a vertical position. Please also position to allow access for service and filter cartridge changing. At the same time, the
assembly should be relatively near the spigot to maximize flow rate.