9
Audio Interface
This Interface enables you to back up
all
your recordings or delete
all
of
them. For fine tuning recordings you will need to use the Graphics
Interface.
1. Select
1. Audio Interface
in Label Manager.
2. Connect your PenFriend to the computer using a USB cable. The
computer will give a BEEP to indicate connection has been made.
3. Select
Backup Files
and select the location of where you want to
save your backup. All your files will be copied onto your computer.
You will not lose any files on the PenFriend.
4. Once the backup is complete JAWS will announce “Your backup is
complete”
5. Disconnect your PenFriend.
6. Any time you wish you can restore past recordings by connecting
again, this time selecting
Restore Into Pen
.
7. Sometimes, you may want to start all over again. In this case by
selecting
Delete Files
you can erase all your files.
8. If you wish to add a single file to a single label, select the add file
button. If you wish to manage all your files, moving audio around
labels, add more than one audio file, etc, you will need to use the
Graphic Interface
.
Graphic Interface
This Interface enables you to fine tune your recordings by selecting
recordings.
1. Select
2. Graphic Interface
in Label Manager.
2. Connect your PenFriend to a Windows computer using a USB
cable. The PenFriend graphic in the bottom left of the screen will
show a green tick to indicate connection has been made.
3. Select
PEN files
and see all your recordings against each unique
label.
4. Select
Add Files
to allocate any pre-recordings such as music,
recitals, birdsongs, to specific label numbers.
