12
2. Connect your PenFriend to the computer using a USB cable. The
PenFriend graphic in the bottom left of the screen will show a green
tick to indicate connection has been made.
3. Select
Add MP3 Music
. The left column will show you the current
music files installed on your PenFriend (blank if no files installed).
The right column,
Choose files to add to PenFriend
, shows the
music files you’ve loaded into Label Manager, but that are not yet
on your PenFriend.
4. Double click in the right-hand column to open
Select a File
.
5. Browse your computer to find the music files you wish to upload to
your PenFriend. Select
Open
to add them to your PenFriend.
6. In the right-hand column select the songs you wish to add your
PenFriend and select the
Transfer MP3
button in the bottom right
corner of your screen.
7.
The tracks will now appear in the left-hand column,
MP3’s on
PenFriend (in sequence)
.
8. To play back the music files, put your PenFriend into
MP3 Mode
(press the
Mode
button three times).
Playback order and skipping tracks
Within Label Manager, using the Graphics Interface, you can edit the
playback order of your music files.
1. The left-hand column,
MP3’s on PenFriend (in sequence)
, shows
the files on your pen.
2. Select any song and use the
UP
or
DOWN
arrows in the centre of
the screen, to define its playback position.
3. Select the
Confirm Sequence
button in the bottom left of the
screen.
To skip tracks, press the third button from the top of your PenFriend
(this is the
Volume
button). The volume level needs to be set in Record
and Playback mode and will become the default when you next switch
on the labeller.
Alternatively, your headphones or portable speaker may have a
separate volume control. These can be plugged into the PenFriend’s
audio port.
