6
PAL / PAL Hi-Lo - Base Assembly Only
The Base Assembly is made up of several components as described below:
Casters.
These are the wheels on which the PAL moves. The front
wheels are rigid and the back wheels are swivel and locking casters to
facilitate movement of unit.
Main Frame.
This is the rectangular piece that is fixed to the casters. The
main frame is made up of several components:
Rotation Motor Assembly.
Consists of mounting plate, 24-volt motor,
and small gear.
Hub Assembly.
Consists of hub, bearings, shaft, large gear and mast
mounting plate.
Stabilizing Arms.
These arms pull out to level the unit and should always
be engaged when the unit is in use.
Counter Weights.
These 17 plates weigh approximately 40 pounds each and
are housed in the counter weight receptacle of the main frame. The weights
should be placed horizontally into the receptacle to facilitate handling.
Housing.
ABS Plastic covering to cover main frame components from
weather. Needs to be in place prior to installing the mast assembly.
Handle.
Connects to the Main Frame through openings in the housing.
