13
REFER TO THE DIAGRAM (above) FOR PARTS IDENTIFICATION.
READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
UNCRATING SPLASH!.
Prior to opening the pallet, inspect the external condition for any visible
damage. Note specific damage identified on Bill of Lading. Contact
RehaMed or dealer immediately to notify of missing or damaged parts.
The
SPLASH!
is shipped on a cardboard covered pallet. You will need to
gather the following tools to begin the unpacking and assembly of your unit:
• a Phillips head screwdriver or powered drill to remove the cardboard
• a 3/4” socket wrench,
• a small flat blade screwdriver,
• a knife or cutters to cut the shrink-wrap and bands.
Splash! – Semi-Permanent Aquatic Lifting Systems
73"
SIDE VIEW
6"
9"
5"
6"
9"
5"
4 1/2"
dia.
REAR VIEW
72"
Mast
Actuator
Shaft
Hand Control
Console Bracket
Battery
Control Box
Attachment
Cover
Housing
Actuator/
Motor Cable
Base Assembly
(located under
housing)
Base
Base Insert Stem
Seat Belt Strap
Chair Assembly
Bolt
Support Arm
Actuator Arm
Chair Support Arm
D. UNPACKING & ASSEMBLY INSTRUCTIONS
