1 Introduction
Manual TRZ 03· EN08 ·2018 September, 10th
11
1.1.7
Transportation
The device is packaged customized according to the transport requirements.
Warning
Risk of injury during transport
Any foot screws must be fitted, if they are used as transit protection against
rolling and tipping. Take additional care that a rolling and tilting is safely pre-
vented.
To lift the meter only the special lifting eyes / eye bolts may be used. Pay at-
tention to the maximal loads for the lifting devices (chapter 6
Specifications
)
– don’t exceed those. Make sure that the load is fastened securely before lift-
ing. Do not stand under lifted loads.
During lifting and/or depositing the device may slip, tip over or fall.
Disregarding the maximum load capacity of the lifting device, the device may
fall down. For any people standing nearby, there is a significant risk of seri-
ous injury.
If the unit is supplied on a Euro pallet, the unit can be transported using a lift
truck or a forklift. During the transport the meter has to be protected against
shock or vibration.
The meter or its additionally mounted spool pieces are equipped with flanges
that are protected with
a sticker foil or blind plugs made of plastic. These
must be removed completely before installation in the pipeline. Remaining
rests of these protections may change the flow pattern and may result in a
measurement error! For any transport e.g. for recalibration we ask you to use
these protections.
1.1.8
Delivery
Supplied number of parts may differ depending on the optional customer order.
"Usually" the following is included in the scope of delivery:
Teil
Quantity
Turbine meter TRZ 03
1
1 small bottle of oil for lubrication
1
Manual
1
Test report
1