RMG TME400, Operating Manual

Page: 73 / 156

4 Operation
MANUAL TME400-VCF · EN08 · July, 01 st 2021
67
2 E Hauser
C03 Pressure Default Default value of the pressure
C04 Pressure Minimum This value presents the lowest pressure value of the individual pres-
sure transducer. An error is displayed if the pressure is below this
limit.
C05 Pressure Maximum This value presents the highest pressure value of the individual pres-
sure transducer. An error is displayed if the pressure is above this
limit.
C08 Pressure offset The measured pressure value can be corrected.
The offset enables a constant increase over the entire pressure
measuring range, based on 1 bar of pressure (atmospheric pres-
sure)
C09 Pressure increase The increase can be changed by the pressure increase factor based
on the offset value.
C10 Pressure sensor tem-
perature
Display of the temperature of the pressure sensor.
C11 Min. pressure sensor
temperature
Temperature range (lower limit) within which the pressure sensor
works "precisely".
C12 Max. pressure sensor
temperature
Temperature range (upper limit) within which the pressure sensor
works "precisely".
Outside of this range, the pressure value is interpreted as "incor-
rectly" measured.
Coor-
dinate
Name Modbus
register
Modbus
access
Protec-
tion
Data
type
Min. Max. Default Unit
C01 Pressure
326
R A float - - - bar
C02 Pressure mode
555
W E menü16 0 2 0
C03 Pressure specification
556
W E float 0.0 100.0 1.0 bar
C04 Pressure Minimum
558
W E float 0.8 100.0 0.8 bar
C05 Pressure Maximum
560
W E float 0.8 100.0 2.5 bar
C07 Pressure offset
562
W E float -0.5 0.5 0.0
C08 Pressure increase
564
W
E
float 0.8 1.2 1.0
C10 Pressure sensor
temperature
566
R E
float
- - - °C
C11 Min. pressure sensor
temperature
568
R E
float
- - - °C
C12 Max. pressure sensor
temperature
570
R
E
float - - - °C