5. OPERATING PROCEDURE
3
Ÿ
Switch ON the controller using on/off switch of the controller.
Ÿ
Power ON LED lights up.
Ÿ
GSM Signal LED blinks every one second trying to get connected to the
network. Further, it blinks every 3 seconds ensuring that the GSM unit has
been connected to the network.
3
1.MASTER USER REGISTRATION
Send SMS to the GSM SIM inserted into
controller as “91YYYYYYYYYY” (Y is your
10 digit mobile number). Now you will
receive a message on your mobile that your
m o b i l e n u m b e r i s r e g i s t e r e d
successfully.(You can register up to 5
users, procedure for registration and
other commands are given in “List of
commands”).
Note:
PLEASE REGISTER THE 1ST USER
NUMBER (MASTER USER) WITHOUT
FAIL.
2.ACTIVATION FOR REGISTERED USER
Send SMS command 71 to activate for
registered user. Now the GSM unit
responds to the registered user only.
3.MOTOR ON
Send SMS command 11 from your
registered mobile number to TURN ON the
motor or call from registered number. Call
gets cut off after 5 rings. You will receive a
message that motor is in ON condition.
4.MOTOR OFF
Send SMS command 10 from your
registered mobile number to TURN OFF
motor or call from registered number. Call
gets cut off after 2 rings. You will receive a
message that motor is in OFF condition.
Ÿ
Other SMS commands are given below in
“ List of Commands”
