Caution:
Switch off the main power while doing the Power Connection steps.
Step 1:
Insert your GSM SIM in the SIM slot given as shown in the GSM controller.
The GSM SIM that is used must support 2G and have a SMS plan.
Step 2:
Wall mount the GSM controller by using the screws in the given slots on
its sides near your motor switch/starter location.
Step 3:
Connect AC 230V / 440V to Red and Black wires of GSM controller
respectively.(refer gure 1 and 2)
Step 4:
For Switch or MCB, Connect blue pair wire to the switch/MCB of the
motor in parallel as shown in gure1.
Step 5:
For starter, Connect blue pair wires to ON button of starter in parallel and
black pair wires to OFF button in series (Refer to gure.2 and gure.3)
4. INSTALLATION
2
PROCEDURE
Note:
In case of doubts please call 044 - 43180017 or What's App 9940594413
from Monday to Saturday 10 am to 6 pm.
Step 6:
Connect the antenna to the GSM unit and place it in open space. Do not
keep the antenna inside the metal casing and must not be laid along with power
wires.
This completes installation.
AC 230V
P N
MCB /
SWITCH
1Φ
MOTOR
Figure3: 1Φ Starter
Figure2: 3Φ Starter
3Φ
motor
R Y B
ON
NV
COIL
A1
A2
OFF
Remove
this wire
OLR
Figure1: 1Φ SWITCH/MCB
1Φ
motor
AC230V
P N
ON
NV
COIL
A1
A2
OFF
Remove
this wire
OLR
