RMF Systems CMS 2, User Manual

Page: 60 / 84

59
As a policy of continual improvement, RMF reserves the right to alter the specification without prior notice.
201.028 REV 1 Date of Issue: 18 June 2018
10-17 Test Reference Array of 16 packed characters
18 Test Duration Unsigned integer
19 Test Format
20 Test Mode
21 Command Unsigned integer
22-23 Test Interval S Unsigned 32 bit integer
24-25 Date/Time Date Unsigned 32 bit integer
26 Alarm Mode Unsigned integer
27 Reserved
28 Faults
29 Reserved
30 Status Unsigned integer
31 Status Flags
32 LED Level Unsigned integer
33 Temperature °C x100
34 RH % x100
35 Peak Pulse Unsigned integer
36 Test Completion Unsigned integer
37 Flow Indication Unsigned integer
38-39 Reserved
40-55 Particle Counts Array of 8 32 bit integers
56-63 Result Codes Array of 8 signed integers
64-71 Contamination Limit Upper Array of 8 signed integers
72-79 Contamination Limit Lower Array of 8 signed integers
80 Limit Water Upper % x100 signed integer
81 Limit Water Lower % x100 signed integer
82 Limit Temperature Upper °C x100 signed integer
83 Limit Temperature Lower °C x100 signed integer
84-85 Log Interval Seconds Unsigned 32 bit integer
86-87 Last Download Date Unsigned 32 bit integer
88 Language Unsigned integer
89-116 Reserved
117-118 Calibration Due Date Unsigned 32 bit integer
119-120 Calibration Last Date Unsigned 32 bit integer
121 Reserved
122 Calibration LED Level Last
123 Calibration LED Level Initial
124 Reserved
Table 11A Modbus Register Map
11.1.1.2 Representations
Modbus Registers - All quantities are represented using Modbus registers. Modbus registers are 16 bit (0-65535
decimal or 0-0xFFFF in hexadecimal notation).
Unsigned Integers - These are simply single Modbus registers. Each can take values from 0 to 65535.