34
As a policy of continual improvement, RMF reserves the right to alter the specification without prior notice.
201.028 REV 1
Date of Issue: 18 June 2018
Figure 6.20
NOTE: The CMS has been designed to be a very flexible product, so has a wide range of settings and operating
modes. However the shipped defaults are suitable for most applications and many users can skip this section.
Actual operation is straightforward even when advanced settings are used during initial configuration.
NOTE: Some items may be missing depending on the options fitted to the CMS.
6.3.3.1 General
Some general information about the connected CMS unit is available. The Identification shows the CMS serial
number and software version. The serial number, together with the test timestamp, uniquely identifies the test
record. These two parameters are the ones used to avoid duplication of test records.
Current Time shows the time set on the CMS. It is important that this is correct since this is used to timestamp the
tests. Pressing the Set button automatically synchronizes the CMS time to that on the computer.
The calibration area displays the date last Calibrated and the next Calibration Due date.
6.3.3.2 Test Number
The Test Number can be used to help identify a test within a sequence. However it is automatically reset when
the CMS is powered up, so instead relying on the timestamp (date and time of test) and test reference is
preferred.
Summary of Contents for CMS 2
Page 1: ...User Manual CMS2...
