To turn off illumination on the device:
1. Open the
visual feedback
tab in the
STATE
section.
2. Change any of the following:
a.
Power
to
off
to turn off the standby switch ring illumination.
b.
Display
to
off
to turn off the display.
When any item is turned off, a notification (orange) is shown in the
STATE
section.
To turn panel illumination back on:
1. Open the same menu and set the corresponding switches to
to
On
.
To turn the front panel lighting on temporarily, just rotate or push the encoder. The panel
will turn back off after five seconds.
RME M-1610 Pro User’s Guide
8.4. Front Panel Illumination |
32
