In order to lock the device, proceed with the following steps:
1. Open the
lock
tab in the
STATE
section (
see Section 2.3, “Use of the Display and Encoder”
).
2.
(optional)
Set Code:
enter a four to six digit code with the encoder.
3.
(optional)
Activate the
Auto Lock
toggle to lock after one minute.
4.
(optional)
Select
Lock Device Now
to lock immediately.
Remember or write down the code shown in
SET CODE
. It is not possible to unlock the
device without this code. A unique secondary code (PUK) can be obtained from RME
Support upon request with a proof of purchase and device serial number.
To delete the code,
move the cursor on the code and push the encoder. "No code" will be displayed.
The device can only be locked and unlocked at the front panel. These controls are not accessible
remotely.
RME M-1610 Pro User’s Guide
8.3. Device Lock |
30