RME Audio Fireface 400, User Manual

Page: 91 / 100

User's Guide Fireface 400
© RME
91
36.5 Digital Outputs
AES/EBU - SPDIF
•
1 x RCA, transformer-balanced, galvanically isolated, according to AES3-1992
•
Output level Professional 2.6 Vpp, Consumer 1.2 Vpp
•
Format Professional according to AES3-1992 Amendment 4
•
Format Consumer (SPDIF) according to IEC 60958
•
Single Wire mode, sample rate 28 kHz up to 200 kHz
ADAT
•
1 x TOSLINK
•
Standard: 8 channels 24 bit, up to 48 kHz
•
Sample Split (S/MUX): 8 channels 24 bit / 48 kHz, equalling 4 channels 24 bit 96 kHz
•
In Quad Speed mode output of Single Speed sync frame
Word Clock
•
BNC
•
Max. output voltage: 5 Vpp
•
Output voltage @ 75 Ohm termination: 4.0 Vpp
•
Output impedance: 10 Ohm
•
Frequency range: 27 kHz – 200 kHz
36.6 Transfer Modes: Resolution / Bits per Sample (Windows only)
ASIO
•
24 / 32 bit 4 byte (stereo 8 byte)
This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the
audio application.
MME
•
16 bit 2 byte (stereo 4 bytes)
•
16 bit 4 byte MSB (stereo 8 bytes)
•
24 bit 4 byte MSB (stereo 8 bytes)
•
32 bit 4 byte (stereo 8 bytes)
MME interleaved supports 2-channel, 4-channel, 6-channel and 8-channel playback in the
above formats. The modes 4/6/8-channel playback are limited to the devices
Fireface Analog (1+2): Up to 192 kHz, playback on the analog outputs 1-8
Fireface ADAT (1+2): Up to 48 kHz, playback on channels 13-20
36.7 General
•
Included power supply: Internal switching PSU, 100 - 240 V AC, 2 A, 24 Watts
•
Typical power consumption: 13 Watts
•
Current at 12 Volt operating voltage: 910 mA (11 Watts)
•
Dimensions including rack ears (WxHxD): 265 x 44 x 165 mm (10.5" x 1.73" x 6.5")
•
Dimensions without rack ears/handles (WxHxD): 218 x 44 x 55 mm (8.6" x 1.73" x 6.1")
•
Weight: 1.5 kg ( 3.3 lbs)
•
Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
•
Relative humidity: < 75%, non condensing
•
Included power supply: Internal switching PSU, 100 - 240 V AC, 2 A, 24 Watts