manualshive.com logo in svg

RME Audio Fireface 400, User Manual, Page: 88 / 100

Share
Download
RME Audio Fireface 400 User Manual Download Page 88

 

 

88 

User's Guide Fireface 400   

© RME

 

 

35. TECH INFO 

 
Not all information to and around our products fit in a manual. Therefore RME offers a lot more 
and detailed information in the 

Tech Infos

. The very latest Tech Infos can be found on our 

website, section News & Infos, or the directory 

\rmeaudio.web\techinfo

 on the RME Driver 

CD. These are some of the currently available 

Tech Infos

: 

 
FireWire Audio by RME – Trechnical Background 
FireWire 800 Hardware – Compatibility Problems 
FireWire 800 under Windows XP SP2 
 
Driver updates Fireface 400 – Lists all changes of the driver updates. 
 
SteadyClock: RME's new clock technology in theorie and operation 
 
DIGICheck: Analysis, tests and measurements with RME audio hardware 
A description of DIGICheck, including technical background information. 
 
HDSP System: TotalMix - Hardware and Technology 
Background information on the digital mixer of the Hammerfall DSP/Fireface 
 
Synchronization II (DIGI96 series) 
Digital audio synchronization - technical background and pitfalls. 
 
Installation problems - Problem descriptions and solutions. 
 
ADI-8 Inside 
Technical information about the RME ADI-8 (24-bit AD/DA converter). 
 
HDSP System: Notebook Basics - Notebook Hardware 
HDSP System: Notebook Basics - The Audio Notebook in Practice 
HDSP System: Notebook Basics - Background Knowledge and Tuning 
HDSP System: Notebook Tests - Compatibility and Performance 
Many background information on laptops. Tests of notebooks. 

Summary of Contents for Fireface 400





































































































Reviews:

No comments