background image

 

 

32

 

User's Guide ADI-8 DD   © RME

 

 

CE 

 
This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic com-
patibility (EMVG) according to EN 55022 class B and EN50082-1.

  

 
 
FCC Compliance Statement

 

 
Certified to comply with the limits for a Class B computing device according to subpart J or part 
15 of FCC rules. See instructions if interference to radio reception is suspected. 
 
 

FCC Warning 

 
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. 
 
This device complies with part 15 of FCC rules. Operation is subject to the following two condi-
tions: 
 
1.  This device may not cause harmful interference 
2.  This device must accept any interference received, including interference that may cause 

undesired operation. 

 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures: 
 

• 

Reorient or relocate the receiving antenna 

• 

Increase the seperation between the equipment and receiver 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 
In order for an installation of this product to maintain compliance with the limits for a Class B 
device, shielded cables must be used for the connection of any devices external to this prod-
uct. 
 
 

Summary of Contents for ADI-8 DD

































Reviews: