background image

Acronyms

Commonly used acronyms and abbreviations

Acronym/Abbreviation

Description

POTS

Plain Old Telephone Service (analog phone)

FXO/CO

Foreign Exchange Office or Central Office location

FXS/Sub

Foreign Exchange Station or Subscriber side location

PBX

Private Branch Exchange

TX

Transmit

RX

Receive

MM

Multimode

SM

Single Mode

2/4 W

2 or 4 wire service

RU

EIA Rack Unit (1.75”)

VOIP

Voice Over IP

LAN

Local Area Network

MUX

Multiplex

LED

Light Emitting Diode

Installation

Prior to installation:

Check for shipping damage

Check the contents to ensure correct model and powering options

Make sure you have the correct fiber type and power available

Have a clean, dry installation environment ready

Required to install;

Install the POTS Mux System into a 19” equipment rack or other suitable location

Check the polarity and voltage of the power with a multimeter before connecting to avoid damage

Connect fiber cables to correct TX and RX ports, make sure the connections are flipped accordingly

Do not remove fiber cable caps until you connect fiber to the unit, avoid contamination

Ground the unit using a ground wire to the ground lug on the back panel

 

RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com

 

Page 3

Summary of Contents for RLH-PM-3 Series















Reviews: