8
RP-2009 Pump for the GX-2009
4. Push the GX-2009 sensor face onto the RP-2009’s top face until the
GX-2009 is seated in the RP-2009 and the retaining clips are fully
engaged with the GX-2009. Be sure that the RP-2009 is fully engaged on
the instrument. When fully engaged, the GX-2009 should not move
around at all.
CAUTION:
If the RP-2009 is not fully engaged, the unit will not respond to the
target gases properly.
Figure 3: Connecting the RP-2009 to the GX-2009
POWER
MODE
LOW FLOW
RESET
AIR
OPEN
LOCK
RELEASE
POWER
Indicator Tab
POWER
H
2
S CO %LEL O
2
RKI GX-2009
RP-2009
