30 • Chapter 5: Setup Mode
AirLink 7010 Gas Monitor Operator’s Manual
6. Press
MENU
(Next).
7. Relay Latch/Auto Reset: Press
ADD
or
SUB
to manipulate the relay's Latching/Auto Reset status.
8. Press
MENU
(Next).
9. Repeat step 1 through step 8 for the remaining relays.
10. Once all four relays have been setup, the display screen will show the following:
11. Based on the specific application, choose one of the following steps to complete:
•
Press
MENU
(Next) to setup the next channel (or continue to system information)
•
Press
ADD
(Yes) to duplicate the settings to all consecutive channels—and
ADD
(Yes) again
to confirm the operation
•
Press
ESC
to exit Setup Mode
View System Information
After the last channel is set, press
MENU
to view the system's information, including the:
•
Build Date (Example: 01/01/2011)
•
Serial # (Example: H00001)
•
Radio (type)
•
Radio error
