26 • 35-3010A-11 Sample-Draw Detector
3.
Wait 1 to 2 minutes to allow the calibration gas to be drawn out and the reading to
stabilize.
4.
Close the housing door.
5.
Store the components of the calibration kit in a safe and convenient place.
Parts List
Table 4 lists replacement parts and accessories for the sample draw gas detector.
Table 2: Parts List
Part Number
Description
06-1248RK
Sample tubing, 3/16 x 5/16, specify length (for calibration kit)
07-0034RK
Sealing gasket for H
2
S flow block cavity
30-0610RK
Pump
33-0171RK
Hydrophobic filter (AcroPak)
33-6010RK-01
33-6095RK
Charcoal filter, CF-188
61-5040RK-03
IR CO
2
sensor, 0 - 5% volume
81-0072RK-01
2.5% volume CO
2
in N
2
calibration cylinder, 34 liter steel
81-0072RK-03
2.5% volume CO
2
in N
2
calibration cylinder, 103 liter
81-0076RK-01
Zero air calibration cylinder, 34 liter steel
81-0154RK-04
4-gas calibration gas cylinder, 50% LEL methane/12% oxygen/25 ppm H
2
S/50
ppm CO, 34 liter aluminum
81-1054RK
Regulator, demand flow, for 34 liter aluminum, 58 liter, and 103 liter cylinders
(cylinders with external threads)
81-1055RK
Regulator, demand flow, for 17 and 34 liter steel cylinders (cylinders with
external threads)
ES-1537-H2S
H
2
S sensor
NC-6245
Combustible gas sensor
