32
•
Parts List
Parts List
Table 4 lists replacement parts and accessories for the sample-draw detector.
Table 4: Parts List
Part Number
Description
06-1248RK
Sample tubing, 3/16” ID x 5/16” OD, specify length
06-1248RK-03
Sample tubing, 3/16” ID x 5/16” OD, 3 feet (for calibration kit)
07-0053RK
Gasket for carbon monoxide flow block
17-2670
Inlet fitting O-ring
17-2671
Inlet fitting front ferrule
17-2672
Inlet fitting back ferrule and tube nut
30-1016RK
Pump
33-0165RK
Hydrophobic filter
33-0167RK
Particle filter
71-0589
Operator’s Manual, 35-3001A-08 Sample-Draw Detector
81-0002RK-01
Calibration cylinder, 50% LEL hydrogen in air, 34 liter steel
81-0002RK-03
Calibration cylinder, 50% LEL hydrogen in air, 103 liter
81-0007RK-01
Calibration cylinder, 50% LEL hexane in air, 34 liter steel
81-0012RK-01
Calibration cylinder, 50% LEL methane in air, 34 liter steel
81-0012RK-03
Calibration cylinder, 50% LEL methane in air, 103 liter
81-0064RK-01
Calibration cylinder, 50 ppm CO in air, 34 liter steel
81-0064RK-03
Calibration cylinder, 50 ppm CO in air, 103 liter
81-0076RK-01
Zero air calibration cylinder, 34 liter steel
81-0076RK-03
Zero air calibration cylinder, 103 liter
81-1054RK
Regulator, demand flow, for 34 liter aluminum, 58 liter, and 103 liter
calibration cylinders (cylinders with internal threads)
81-1055RK
Regulator, demand flow, for 17 liter and 34 liter steel calibration cylinders
(cylinders with external threads)
ES-1531-CO
Carbon monoxide sensor
NC-6245
Combustible gas sensor, plug-in type,
LEL
range