1.It is used for the crawler only.
2.It contains various steering modes which makes the crawler
perfect for crawling on road or rocks.
3.Fully extend its antenna while using it.
4.Various frequencies of AM crystals are available at factory
5.This radio control is a high precision product and allowed itself to
be used with your good care.
1.Antenna
2.LCD Screen
3.Steering Control Wheel
4.Steering Trim/Reverse Switch
5.Throttle Trim
6.Power Switch(Slide it to turn on/off)
7.Working Indicator
8.Servo steering Trim
(
Angel)
9.Trigger
10.Trim Switch(rear wheels)
12.SEL function button
11.Steering Mode Switch
General information
Full function AM radio controller
This AM radio controller contains various steering modes
which are perfect for the rock crawler.
MODE 1
MODE 2
This illustration is your crawler in the situation by
performing the first mode on the radio control.
Front steering is to turn to the left or right but
rear steering remains aligned.
This illustration is your crawler in the situation by
performing the second mode on the radio control.
Front steering is to turn to the left and rear steering
is to do likewise.
Full function steering modes
Steering Trim/Steering Reverse Function
TRM.ST(Steering Trim)range is around 0-10.0% for both left and right steering on front wheels.
Tune this switch to select your desired steering trim volume.
To switch to steering Reverse program:
Press
SEL
(Select Button)on your radio once,this LCD display appears Channel 1(NOR)
Tune the Switch(Steering Trim/Reverse Switch)to change NOR into the REV as shown below:
1
2
6
7
9
11
12
10
8
3
4
5
12.8v
12.8v
NO 1
NO 1
Your crawler will
work like so:
Your crawler will
work like so:
LCD Screen
LCD Screen
MODE 4
MODE 3
This illustration is your crawler in the situation by
performing the third mode on the radio control.
Front steering is to turn to the left but rear steering
is to trun right.
This illustration is your crawler in the situation by
performing the fourth mode on the radio control.
Rear steering is to turn to the left or right but front
steering remains aligned.
12.8v
12.8v
NO 1
NO 1
Your crawler will
work like so:
Your crawler will
work like so:
LCD Screen
LCD Screen
To open the battery door
To close the battery door
TRM.ST
10.0%
R.B.D
CH1
TRM.ST
10.0%
CH1
L.F.U
Throttle Trim/Throttle Reverse Switch
10.0%
R.B.D
CH2
CH2
10.0%
L.F.U
TRM.TH(THrottle Trim)range is around 0-10%.Tune this switch to select your desired throttle trim volume.
CH1
CH1
REV
NOR
CH2
CH2
REV
NOR
To switch to Throttle Reverse program:
Press SEL(Selecct Button)on your radio once,this LCD display appears Channel 1(NOR.)
Tune the SWITCH(Steering Trim/Reverse Switch)to change NOR into REV as shown below:
This dial adjusts the overall travel of the steering servo,push
the dial forward for maximum steering.Pull the dial back to reduce
steering travel.D/R adjustable range is around 5-10%
This dial is to centre the rear wheels.The
range is around 0-10% on the left or right
rear wheel.
Steering Dual Rate Control Dial(D/R)
Pull back
Pull back
Push forward
Push forward
D/R
10.0%
10.0%
CH1
CH3
Trim Switch(For Rear Wheels)
It controls the steering of your rock crawler.Turn the wheel to the right and
your crawler turns right.Turn the wheel to the left and your crawler turn left.
It controls the speed and braking ability of your rock crawler.Pull the trigger
to speed up.release the trigger to decelerate,and push the trigger to brake.
Pushing the trigger a second time and activates the reverse function.
Throttle/Brake Trigger
SEL funciton button
This AM radio controller contains a variety of select functions.Once your press SEL button,different
functions will come up in turn with LCD indicators on.
B(Optional)
3
4
