2
1
Additional Items Needed For Running Your Model
Use of the transmitter to control your EP vehicle...
Please install eight "AA" batteries to the transmitter.
Slide the battery cover to open the
battery compartment.
Replace the battery cover after
eight AA batteries are installed.
1
2
3
10
Function Switches On This Transmitter
1.Throttle Reverse Switch
2.Steering Reverse Switch
Battery Precautions:
1.In order to maintain good performance ,we warmly recommend you to use the 1.5V
alkaline batteries instead of the 1.2 V chargeable batteries.
2.The batteries may leak in the event that they are installed with wrong polarities.
3.Do not use batteries of different types.
4.Do not mix the old and new batteries.
5. Please replace batteries when power indicators are weak.
7
8
10.Power Switch
1. Trigger at the neutral position
3. Re lease the trigger back to neutral
position to slow down the car.
2. Pull the trigger inwa rd to drive
the car forwa rd.
4. Push the trigger outwa rd to stop
the car imme diately comp letely
(breaking)
5. Re lease the trigger back to
the neutral position again
(required step to activate the
backwa rd feature on the ESC)
6. Push the trigger outwa rd again
to drive the car backwa rd.
Length...........450mm
Width...........258mm
Height......................200mm(body excluded)
Gear Ratio...........1:48
Wheel Diameter........126mm
Wheelbase................320mm
Wheel Width................56mm
Weight..................
.
Motor.......................7.2V RC540
Battery....................7.2V SC2000mAh NI-mh
/ 470mm(Extra loner version)
2100g
Technical Data:
RC540 motor
ESC w/reverse
speed control
Include 7.2V rechargable
rechargable battery
Quick-release battery cover
4WD for optimal
power delivery
Axle-mounted
steering servo
aluminum links
Plastic bumper
Anodized chassis and
side plates
2-channel pistol-grip radio
Adjustable width body mounts
Oil shocks with
anodized aluminum
Locked front and rear spool
for maximum power
Steering Angel:40-50
Maximum Torque Angel:90
Air Current:about 1A,Climb Current:about 15A
1/10th Electric Powered Crawler is equipped with single motors,a lot of metal parts to
make sure the construction solidly.The high precision ESC is also equipped on the Car.
You are not only have a chance to see the beautiful nature scene but also climb over the
most chanlleging rugged terrain.
A
Transmitter
4
5
6
3.Control Wheel
4.Steering Trim
5.Throttle Trim
6.Trigger
7.Crystal(To change please pull out)
8.Power Indicators
9.Trigger Setup Trim
9
10
