RK Rose+Krieger Multilift I, Assembly Instructions Manual

Page: 114 / 320

Mono Synchro
Electrical connection 2-pin DIN LS plug connector n 8-pin DIN plug connector
n 8-pin Mini-Fit Jr. plug con-
nector
Current consumption, max. [A] 4.5
Power input, max. [W] 120
Duty cycle (DC) with nominal
load
DC 10% at 20 minutes:
n 2 minutes movement
n 18 minutes standby
Service life n 10 000 double strokes with stroke 500 mm, 1000 N, 16 mm/s
n
5 000 double strokes with stroke 500 mm, 3000 N, 8 mm/s
Protection
rating
without milled slot
IP 20
(If supporting surface and contact surface is covered over the entire
surface and free from drilled holes, or if using the SnycFlex adapter
plate)
with milled slot IP 10
Continuous sound pressure
level [dBA]
< 60
Lifting speed [mm/s] 8 16 8 16
Compressive force/tensile
force, max. [N]
3000/1000* 1000/1000* 3000/1000* 1000/1000*
Ä
“Max. compressive/tensile force depending on the stroke length”
on page 116
Compressive force/tensile
force, max. [N]
(in medical applications)
2000/500* 1000/500* 2000/500* 1000/500*
Ä “Max. compressive/tensile force depending on the stroke length in
medical applications” on page 117
Position signal
(Pulses per mm of travel dis-
tance)
2 1
Number of hall sensor chan-
nels
0 1 1
Operating conditions n Temperatures (in dry rooms): +5°C
-
+40°C
n Relative air humidity: 30%
-
75% (no condensation)
n Air pressure: 700 hPa
-
1060 hPa (up to 3000 m altitude)
* Only in conjunction with additional bottom assembly plate
installed by RK Rose+Krieger GmbH. The tensile force load type
must already be taken into account and cannot be retrofitted by
the operator.
Technical data
Technical data
-
Multilift I
20.02.2019 Lifting column Multilift I/Multilift II 114