Operator
’s Guide
Inspector D4000
™ Laser
002-7858
RJS, Minneapolis, MN
25
8.6 Continuous Mode
In the Continuous Mode, an additional data analysis screen displays:
Continuous Mode
#Decodes 013/019
%Decodes 68%
The first line indicates the results are for a scan captured with the Continuous Mode
On
The second line is the number of scans with decoded bar codes and the number of scan at-
tempts.
The third line is the percentage of bar codes decoded to scan attempts.
(This is NOT the
ISO/ANSI Decodability percentage)
There is a limit of 100 good scans in the Continuous Mode (or 250 total scans) whichever comes
first. When a limit is reached, the unit automatically stops scanning.
Note:
In Continuous Mode the unit continues to attempt reads
as long as the Laser trigger is depressed. When using
this mode the beam may be moved around the symbol
to provide extra analysis. The analysis result is based on
the average.
Note:
After scanning a bar code, the Inspector D4000 will re-
turn to the last Data Analysis screen displayed before the
bar code was scanned.
The Data Analysis screens will cycle through a loop.
Once the last screen has been viewed, pressing the Se-
lect button again will return the Inspector D4000 to the
initial Data Analysis Screen.
13 good decodes
out of 19 at-
tempted reads
Percentage of
good reads