RJM Amp Gizmo, User Manual, Page: 20 / 22

Troubleshooting
Problem: The LEDs don’t flash when you hold down the Write
Button.
Solution: The A
MP
G
IZMO
did not receive a MIDI Program Change
message. First, verify that you have a valid MIDI connection. The
MIDI output of your MIDI controller should be connected to the MIDI
input of the A
MP
G
IZMO
by a MIDI cable that’s known to be working
correctly. The next most likely cause is that the A
MP
G
IZMO
is set to a
different MIDI channel than your MIDI controller. Check both devices
to insure that they’re set to the same channel. On the A
MP
G
IZMO
, the
MIDI channel is set to 1 by default and can be changed in Setup Mode.
Problem: I’m trying to control my amplifier, and it’s not working or
behaving erratically.
Solution: This can happen when using the wrong amplifier interface
cable, or if the A
MP
G
IZMO
is not configured correctly for your amp.
Check the instruction sheet that came with your amplifier interface
cable, or check the Setup Mode section for more information on how to
configure. You can also check contact us at RJM Music for assistance.
We’d be happy to help you out.
14