RJM Amp Gizmo, User Manual, Page: 13 / 22

Bank Selection
The Amp Gizmo can store programs in MIDI banks 0 and 1, for a total
of 256 programs. Continuous Controller #0 (Bank MSB) is used to
select the current MIDI bank. Bank numbers above bank 1 are ignored.
Backing Up Your Settings: Sysex Dump
A Sysex (System Exclusive) data dump will send the current A
MP
G
IZMO
system configuration out through the MIDI Thru/Out port. You
can then save this data to your computer, or copy the settings directly to
another A
MP
G
IZMO
.
Hold down the Switch 5 button while powering up the A
MP
G
IZMO
, and
the A
MP
G
IZMO
will immediately send the Sysex Dump. It only takes a
couple of seconds to complete.
If you wish to copy settings from one A
MP
G
IZMO
to another, connect
the MIDI Thru/Out of the transmitting unit to the MIDI Input of the
receiving unit, then power up the transmitting unit while holding down
the Switch 5 button. (Note that the receiving A
MP
G
IZMO
must be in
normal operating mode to receive data.) The receiving unit will display
a progress bar graph on the LEDs. The transfer goes very quickly,
taking only a couple of seconds. In the case of an error, the receiving
unit will flash all LEDs 5 times.
Once the transfer completes, the receiving unit will reset, then return to
normal operating mode. The receiving unit now has an exact copy of
the transmitting unit’s settings.
7