RJM Amp Gizmo, User Manual, Page: 10 / 22

MIDI In – Jack for incoming MIDI commands. Connect your MIDI
foot controller here. The A
MP
G
IZMO
will phantom power a compatible
MIDI controller if you use a 7-pin MIDI cable. The AC adapter
provided with the A
MP
G
IZMO
can phantom power most MIDI
controllers provided that they can run on a 9V AC supply. However, if
your MIDI controller needs more than 800mA, an adapter with a higher
current capacity is recommended.
Power – This unit requires power supply in the range of 9 to 18 volts,
AC or DC. The plug should be a 5.5mm/2.1mm barrel connector,
similar to those used in most effects pedals. The A
MP
G
IZMO
requires a
minimum of 200mA of current.
4