RJG IA2-M-DFT, Product Manual

Page: 9 / 20

Product Manual | Lynx™ Digital Flow‑Temperature Interface Module IA2‑M‑DFT RJG, Inc. 3
INSTALLATION
INSTALLATION OVERVIEW
The shielded, digital flow‑temperature interface
module is mounted to a solid surface, such as
the machine frame, inside the molding machine
on a DIN rail.
IA2‑M‑FT
The shielded, digital flow‑temperature interface
module cable is connected directly to the
Smartflow® TracerVM™with User Interface
flow‑temperature meter on one end, and
connected to the IA1‑M‑DFT on the other using
the eight‑pin connector. The shielded, digital
flow‑temperature interface module is connected
to the ID7‑M‑SEQ, IA1‑M‑V, OR2‑M, OA1‑M‑V,
or DIN/LX‑D using the integraded amphenol
connector. Either an ID7‑M‑SEQ or DIN/
LX‑M shielded module is required to physically
connect the IA2‑M‑DFT to the eDART system.
eDART CONNECTION
A Lynx cable CE‑LX5 is connected to the Lynx
port on the ID7‑M‑SEQ or DIN/LX‑M and to
a Lynx port on the eDART to provide it with
the machine’s sequence signals for process
monitoring and control calculations, along with
the other installed machine interface module
signals.
FLOW/TEMPERATURE METER CABLE
IA2‑M‑DFT
ID7‑M‑SEQ/
DIN/LX‑M
SMARTFLOW® TRACERVM™ FLOWMETER
LYNX CABLE
CE‑LX5 TO eDART